Home / Acoustic Transducers / Microphone Cartridges / Free Field Microphones / Type1003
Type 1035
1/2'' Free-Field Microphone, Externally Polarized
Type ZX1035 is a 1/4-inch free-field microphone designed for high sound level measurements.
Dyn. range : 40 – 167 dB
Freq. range : 5 – 20000 Hz
Polarization : 0 V (Prepolarized)
Sensitivity : 4.0 mV/Pa
Standards : IEC 61094-4 WS3F
Type 1003 is designed for high-precision measurement where a microphone with high sensitivity is required.
Typical Use Cases
Precision sound measurement
Premium class ANSI sound level meters
Compliance with IEC 61672 Class 1
Use of Free-Field Microphones
Type 1003 is not only suited for use in class 1 Sound Level Meters but also for all high-precision acoustic measurements where a robust and stable, externally polarized free-field microphone with an upper frequency of 40 kHz is required.
At higher frequencies, reflections and diffractions cause a pressure increase in front of the diaphragm of a microphone. If not corrected for this would result in an increased output voltage.
A free-field optimisation means that the frequency response of the microphone has been designed in such a way that the free-field response at 0 degrees incidence is flat. This microphone is optimized for use with the protection grid in place.
Free-field microphones are commonly used for sound measurement in an anechoic chamber or far away from reflecting buildings, etc. Another area for free-field microphones is for general electroacoustic measurements like loudspeaker and microphone measurements.